Home   |  Message Board   |  Information   |  Classifieds   |  Features   |  Video  |  Boat Reviews  |  Boat DIY
Anchor - Walleye Message Central
Walleye Message Central

Go Back   Walleye Message Central > Boats, Motors, Electronics and Trailers > Boats

Reply
 
Thread Tools Display Modes
  #1  
Old 10-08-2021, 08:40 PM
Patrick1 Patrick1 is offline
Minnow
 
Join Date: May 2015
Posts: 13
Default Anchor

I have an 18ft alum Polarkraft, I would to know what anchor is recommended for Perch fishing. I am on lake St-Clair, its about 20ft and the bottom is mud and weeds (no rocks).
Reply With Quote
Sponsored Links
Advertisement
 
  #2  
Old 10-08-2021, 08:53 PM
bfish bfish is online now
Wallhanger
 
Join Date: Oct 2010
Location: SE TN
Posts: 1,019
Default

chene for me when I use to anchor.

Spotlock has ended my anchoring days
Reply With Quote
  #3  
Old 10-08-2021, 08:54 PM
Hot Runr Guy Hot Runr Guy is online now
Wallhanger
 
Join Date: Nov 2006
Location: West Chicago, IL, USA.
Posts: 15,633
Default

Don't be surprised if one of the responses mentions having 3 of these anchors, and 500' of this chain,,,,,

HRG
Attached Thumbnails
Click image for larger version

Name:	anchor_maintenance.jpg
Views:	64
Size:	19.6 KB
ID:	329796  
Attached Images
 
__________________
"I've got a car with a trailer hitch, and a pocket full of money. Do you want to sell that boat today, or not?"
My Mentor, Bill Michalek, circa 1975
Reply With Quote
Sponsored Links
Advertisement
 
  #4  
Old 10-08-2021, 08:56 PM
Lazy Ike Lazy Ike is offline
Keeper
 
Join Date: Jun 2003
Location: IN.
Posts: 455
Talking Lol

Quote:
Originally Posted by Hot Runr Guy View Post
Don't be surprised if one of the responses mentions having 3 of these anchors, and 500' of this chain,,,,,

HRG
I wonder who?
Reply With Quote
  #5  
Old 10-09-2021, 04:26 AM
last chance's Avatar
last chance last chance is offline
Wallhanger
 
Join Date: Mar 2013
Location: muncie indiana
Posts: 2,513
Default

I use a similar anchor to the chene. it has the fluke style with the sliding ring for raising the anchor.
Reply With Quote
  #6  
Old 10-09-2021, 05:06 AM
Donscs Donscs is offline
Keeper
 
Join Date: Jul 2017
Location: Michigan
Posts: 212
Default

Iíve been using a Fortress anchor with some chain for years on Lake St. Clair. They are a bit pricey compared to others but they work great.
Reply With Quote
  #7  
Old 10-09-2021, 07:29 AM
Marty59 Marty59 is offline
Wallhanger
 
Join Date: Jul 2012
Location: Michigan
Posts: 2,117
Default

Quote:
Originally Posted by Donscs View Post
I’ve been using a Fortress anchor with some chain for years on Lake St. Clair. They are a bit pricey compared to others but they work great.
I fish lake St Clair all the time and use the Digger Anchor 15 with 5' of chain and a roll of 100' rope on board. I don't necessarily let it all out....depending on depth. Most spots on the lake are less than 15'. You may get by with a Digger 12.

Also works well down in Lake Erie.

https://www.amazon.com/Extreme-Max-3...a-605725304093

Marty
Reply With Quote
  #8  
Old 10-09-2021, 08:49 AM
gbin gbin is offline
Wallhanger
 
Join Date: Aug 2012
Location: upstate NY (but MN in my heart!)
Posts: 1,384
Default

I think fluke-style anchors are most often recommended for small boats over soft bottoms. Folks above have already suggested a few such.

Gerry
Reply With Quote
  #9  
Old 10-09-2021, 09:20 AM
Wallychowder Wallychowder is offline
Wallhanger
 
Join Date: Jan 2021
Posts: 1,218
Default

I use a white anchor, its an old Johnson !
Reply With Quote
  #10  
Old 10-09-2021, 10:01 AM
REW REW is offline
Charter Member
 
Join Date: Nov 1999
Location: .
Posts: 39,027
Default

Some years ago, the head boat on some of the big lakes got tired of being blown off their spots when fishing rock piles.

So, they went over to an auto parts junk yard and picked up V-8 engine blocks and placed them on their bow. They used an electric winch to raise and lower the engine block anchor - Very effective indeed - no matter the bottom structure.

For your use a 28 lb navy anchor and 250 feet of nylon rope works well.

But, 28 lbs is tough to lift and drop multiple times in the day. So, another option is to use several 10 lb navy anchors or similar that are daisy chained together with 50 foot sections of nylon rope. then, only use the number of anchors and lengths of rope necessary to hold your rig in the current conditions.

Other folks use the very very lightweight large water spike anchors - with a5-10 foot section hookes to the anchor to insure that the anchor will deploy. Again multiple 50 foot sections of nylon anchor rope work well to be able to use just as much rope as is needed to hold the boat on the lake for the conditions being experienced. The one disadvantage of the large water spike is that most folks will disassemble it for storage when it is top side. But it is a very effective, very light weight anchor that does an outstanding job on a muc bottom. On a rocky bottom - not so much.

I often fished the mississippi river with my buddy who had a great boat. The mississippi, often has some pretty good current, so a good anchor is necessary, when fishing wing dams and similar fish holding spots. So, he used a large water spike with 5-10 feet of chain and it worked very very well. However, we were fishing the river one day and were having great luck. It came time to move and he asked me to lift the anchor. So, I went to the bow of the boat and began to lift the anchor. However, it would not come. Based on how the anchor rope was acting we both figured that when the anchor was being deployed, the anchor worked its way down river in the current, before hooking up to the bottom and during its way down river, it slid underneath an underriver cable or pipeline that was crossing the river. As a result, when lifting the anchor rope, I could feet the rope come tight on the anchor and then with a significant lift, something was coming up with it for a very short amount and then it would come no more. So my buddy motored up as close to vertical on the rope as we could get and then I reached down as far as I could and cut the anchor rope with my fillet knife. The river swallowed another anchor that day. So, the next day, I stopped over to the marine store and picked up a new anchor for the boat. Since I had dropped it at that spot, I felt responsible. We never lost it again.

What ever you do, do NOT use a snap to attach an anchor rope to an anchor chain. Never use a snap to attach a chain to an anchor. When I first started fishing, I lost 3 anchors, before I learned that snaps are not the best way to connect an anchor rope to an anchor. Rather, use an anchor clevis.

For example:
https://www.amazon.com/Shackle-Clevi.../dp/B01FOQK5KE

To connect a piece of chain to an anchor, use a chain connecting link to connect the chain to the anchor:

https://www.fleetfarm.com/detail/pee...necting%20link

For the rope, I use 50 foot lengths of 3/8th nylon rope. Then, I braid a 1 foot diameter loop at each end of the anchor rope. If using it for an anchor rope, One loop works nicely to connect to a boat cleat and the other end with its loop works well with an anchor clevis connection. If I need more than 50 feet of rope, I will simply use an anchor clevis connect one rope loop to the next rope loop. If the waves are running 4 feet, and I need to stay in place to avoid being blown into the rocks, I will add an additional navy anchor at each of the rope junction points. That way, the next anchor up the line will hold the rope of the first anchor close to the bottom to avoid having the storm pull the anchor from the bottom. Easy, simple and very effective.

---------------------------
But, at the end of the day, use the anchor that works well for you, for your boat, and for the conditions that you fish with respect to wind and waves.

Finally, to improve anchor holding conditions in terrible wind and wave conditions, consider the use of a stretch link between the boat and the anchor rope.
In this set up, one puts a loop in the anchor line about 10 feet from the boat. Then a stretch link is connected to that loop and to a cleat on the boat. That way, when a big wave comes up, the stretch link stretches but doesn't pull the anchor, and then, when the wave subsides, the stretch link pulls the boat back to its original spot. The use of a stretch link allows a boat owner to use much smaller and lighter anchors in bad conditions, because the stretch link accommodates the surge from the waves. Note: The surge link is ineffective in a river situation, with heavy current because the current is constant. In that case, the anchor is dropped, the stretch link is stretched out and if the anchor does not hold, down the river you go.

For example:
https://www.anchorshock.com/store/c1..._Products.html

or:
https://www.ebay.com/itm/12422465786...Cclp%3A2047675

You can also use these shock lines for tying up at the dock, when the dock is exposed to the wind. The shock lines reduce strain on the dock, on the boat cleats, and the boat, because when the waves and wind come the shock lines absorb the surge and return the boat to its original position.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 11:28 PM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.