2019 Ranger VS1782 rod holders

[tomste]

Recently purchased this new boat and cannot find rod holders that fit the track system. Cabelas was no help. Any suggestions?

[fishin10]

I believe the rail track system on the Ranger is similar to the Tracker Versa Track system. This is what I went with on my Tracker Pro Guide. I purchased four of the brackets off Amazon,then bought the rod holders thru Cabelas. I added and glued rubber pads to the bracket so I would not scratch the boat finish moving the brackets. You could also order the complete set off Amazon, then add the rubber pads.
https://www.amazon.com/Holder-Tracke...s%2C388&sr=8-3
Or Just order the brackets and add the rod holders of your choice
https://www.amazon.com/Woodlander-Ou...%2C388&sr=8-24

[tomste]

Thanks for your reply Fishin, but the track systems do not appear to be the same. My boat has curved edges and nowhere to insert the bolt head inside the track. It must be some different bolt type that goes in sideways then turns to lock.

[fishin10]

I guess you will have to speak to the dealer about Ranger specific mounts for the rail system. Most likely will be wildly over priced, like the Tracker ones purchased thru BPS.

[rmarti5]

Just came across this and if you haven't got anything figured thought I would share, I bought the Bro Craft I just had to grind on the T bolt ever so slightly to get them to work. over all took 10 min They worked great.